Home » Adhesive Products » Anaerobic Adhesives

Anaerobic Adhesives and Sealants

The Torque Threadlocking Series represents state of the art anaerobic adhesive technology with world class performance. The Torque Threadlocking Series is manufactured to provide specific viscosities, strengths, and cure speeds to meet any application requirement. These anaerobic resins prevent against vibration loosening, while locking and sealing threaded assemblies and metal parts. They have excellent resistance to extremely harsh environments.

Torque Threadlocking products are used in a wide range of assembly applications; from delicate electronic devices to heavy industrial equipment.

They distribute the load on a fastener over the entire engagement length of the assembly, greatly reducing or completely eliminating fastener and material fatigue. They protect threaded areas by preventing rust and corrosion. These products significantly reduce production cost while enhancing the reliability of the finished product.

 


Torque Threadlockers 

Anaerobic Adhesives/Sealants Thread locking

The TORQUE THREADLOCKING SERIES represents state of the art anaerobic technology, with world class performance.

The TORQUE THREADLOCKING SERIES is manufactured to provide specific viscosities, strengths, and cure speeds to meet any application requirement. These anaerobic resins prevent against vibration loosening, while locking and sealing threaded assemblies and metal parts. They have excellent resistance to extremely harsh environments.

TORQUE THREADLOCKING products are used in a wide range of assembly applications; from delicate electronic devices to heavy industrial equipment. They distribute the load on a fastener over the entire engagement length of the assembly, greatly reducing or completely eliminating fastener and material fatigue. They protect threaded areas by preventing rust and corrosion. These products significantly reduce production cost while enhancing the reliability of the finished product.

 


Torque Threadsealers (17)

Anaerobic Adhesives/Sealants Threadsealing

The TORQUE liquid thread sealants are specifically designed to seal and secure metal pipes and fittings by filling the space between threaded metal parts and hardening to prevent leakage. They do an excellent job of sealing in severe environmental conditions and prevent leakage that may be caused by vibration loosening, damaged threads, or temperature cycling. TORQUE liquid thread sealants seal instantly to moderate pressures and when fully cured; they seal to the burst strength of most piping systems. They have excellent resistance to a wide range of chemicals such as hydraulic fluids, oils, fuels, water, lubricants, etc. They are ready to use, single component, solvent free materials, designed to handle both low and high pressure applications. The TORQUE THREADSEALING products do not shrink, shred, tear, or relax. They are formed in place sealants conforming to the parts they are used on, creating a durable, positive seal. The TORQUE THREADSEALING family of products offers a full range of viscosities, strengths, and cure speeds that are designed to meet your needs.


Torque Retaining Compounds (12)

Anaerobic Adhesives/Sealants Retaining

The TORQUE RETAINING SERIES is engineered to greatly increase the shear strength of cylindrical, non threaded assemblies. These products fill the inner space and surface irregularities between the parts forming a tough, durable polymer, that creates a unitized, strong, precision assembly, preventing corrosion. They are single component, solvent free compounds that are ready to use right from the bottle, or can be easily automated. The TORQUE RETAINING SERIES is formulated in a wide range of viscosities, gap filling ability, cure times and strength characteristics. This technology greatly enhances the reliability and performance properties of the finished assembly. Even in the best press fit application there is only 20 to 30 percent actual metal contact between the surfaces. The TORQUE RETAINING SERIES fills all the voids between the parts increasing the over all strength of the assembly by 2 to 3 times that of the original press fit. Other retaining and locking devices can be eliminated such as keyways, set screws, splines, tapers, knurls, etc. Machining tolerances can be relaxed lowering the cost of the assembly and simplifying the assembly process. Improved quality, reliability, cost effectiveness, ease of use, are just a few of the many benefits the TORQUE RETAINING SERIES brings to improve the manufacturing techniques in your assembly applications.


Torque Gasketing Products (9)

Anaerobic Adhesives/Sealants Gasketing

The TORQUE GASKETING SERIES allows for maximum clamp loading and positive sealing of mating flanges and housings. These liquid gasketing materials are ideally suited for applications where there are small gaps on rigid metal to metal assemblies. They create a formed in place gasket, eliminating the need for large inventories of pre-cut gaskets.

The TORQUE GASKETING SERIES keys into the surface of the flanges when they are mated together creating a positive, uniform seal in the joint. This material does not shrink, tear, or relax when fully cured and it is not necessary to re-torque flange bolts when using these products. They are extremely durable materials, that have exceptional pressure and chemical resistance. They are available in a full range of strengths, cure times, and viscosities, to meet specific application requirements.

The TORQUE GASKETING SERIES is a total leak prevention system. They are single component, solvent free materials, that fill all the voids, surface gaps, and irregularities, allowing for a positive seal between mating flanges, along with improving the structural integrity of the assembly.


Torque Surface Preparation Products (4)

TORQUE SERIES SURFACE PREPARATION PRODUCTS are used to insure the maximum performance of the TORQUE SERIES anaerobic adhesives and sealants. ADHESIVE SYSTEMS, INC., as a responsible manufacturer with concern for the environment, formulates these products with “non ozone depleting” chemicals. TORQUE PRIMER N and PRIMER T are used to speed the curing and increase the gap filling properties of TORQUE ANAEROBIC PRODUCTS. They are ideally suited for applications that require exceptionally fast fixture times on surfaces that are inactive. They increase the activity of the parts being assembled by priming the surfaces and removing contaminates that may be present. Both TORQUE PRIMER N and PRIMER T are solvent based products, and TORQUE PRIMER SF is a solvent free formulation. TORQUE SAFETY SOLVENT is a industrial strength cleaner that removes grease, oil, and dirt from the parts being assembled. Proper surface preparation on component parts that have a high level of contamination and/or involve inactive surfaces will greatly enhance the performance of the products in the finished application.

Contact one of our sales representatives today
to inquire about a quote from Regal Plastics
or call us at (800) 441-1553