Home » Adhesive Products » Cyanoacrylates

Cyanoacrylate Adhesives

All of the ADVANCE PERFORMANCE SERIES products are available in a complete range of viscosities, cure speeds, and performance properties to meet your specific application requirements. These products represent the latest technology in cyanoacrylate adhesives, offering the ultimate in performance and value. When needed products can be custom formulated to meet specific application requirements.

WHAT WE BOND:

  • ABS
  • ACRYLIC
  • ALUMINUM
  • BAKELITE
  • BRASS
  • CHLOROPRENE
  • CHROME
  • COPPER
  • EPDM
  • FIBERGLASS
  • LATEX
  • NATURAL RUBBER
  • NBR
  • NEOPRENE
  • NITRILE
  • NYLON
  • PHENOLIC
  • POLYCARBONATE
  • POLYESTER
  • POLYSTYRENE
  • PORCELAIN
  • PVC
  • SBR
  • STAINLESS STEEL
  • VELOX
  • WOOD

We offer the following Cyanoacrylates series:

  • RP Series (15) - Rubber and Plastic Bonding Cyanoacrylates
  • M Series (5) - Metal Bonding Cyanoacrylates
  • SI Series (10) - Surface Insensitive Cyanoacrylate Adhesives
  • FS Series (10) - Fast Setting Cyanoacrylate Adhesives
  • TS Series (4) - Clear, Toughened Instant Adhesives
  • HP Series (4) - Black, Toughened Instant Adhesives
  • NI Series (4) - Low Odor/Low Blom Instant Adhesives
  • NI "E" Series (4) - Low Odor/Low Bloom Instant Adhesives
  • HT Series (8) - High Temperature Cyanoacrylates
  • MG Series (9) - Medical Grade Instant Adhesives (USP Class VI)

We also provide the following products:

Surface Preparation Products

A complete family of accelerators and primers that enhance the performance of the Advance Performance Series adhesive products. Quick Tac accelerator products are specifically engineered to shorten fixture times, cure speeds and increase the gap filling capabilities of these instant adhesive products. Poly Prep Primers are formulated to improve the bonding properties on difficult to bond surfaces. Remove Instant Adhesive Debonder removes cured adhesive residue from a variety of surfaces.

Quick-Tac Accelerator, for Faster Curing  

 QUICK-TAC ACCELERATOR™ has been developed as a treating agent for use with the ADVANCE PERFORMANCE ™ family of instant adhesive products. If faster setting speeds are desired, QUICK-TAC™ will aid the curing process and give exceptionally faster set times. When curing beads or in applications where the adhesive is not between two parts, it will allow for fast uniform curing.

QUICK-TAC™ will aid the bonding of porous materials such as fabrics or woods. It is useful when bonding acidic surfaces or in low humidity conditions promoting consistent curing times. Ideal for wire tacking, silk screening, or in loudspeaker assembly. Using QUICK-TAC™ enables the adhesive to fill gaps up to 0.20”.

Poly Prep Primer, for Bonding Difficult Surfaces  

This primer system is used for difficult to bond surfaces. POLY PREP PRIMER™ can be applied by brushing, spraying, or parts may be dipped prior to assembly. It is used on polyethylene, polypropylene, certain elastomers, or other difficult to bond substrates. It is a single component, ready to use material. Simply apply it to the surface you wish to bond, wait 30 seconds, and the parts are ready for assembly. POLY PREP PRIMER™ is used with the ADVANCE PERFORMANCE™ products. Available in 2 ounce bottles and 1 gallon containers.

Remove Instant Adhesive Debonder™

This unique product easily removes cured adhesive from countertops, work stations, assembly tools and production parts. Just apply to the area that needs to be treated, wait 30 seconds, wipe residue away with a damp cloth and discard. If adhesive residue remains on the surface, repeat this process. Available in 2 ounce bottles and 1 gallon containers.

Contact one of our sales representatives today
to inquire about a quote from Regal Plastics
or call us at (800) 441-1553