Regal-Plastics; Kydex for Aircraft Interior Components

Phone: ● (800) 441-1553 ● Fax: (972) 484-0746
solutions@regal-plastics.com

KYDEX® proprietary thermoplastic sheet is offered in a range of high performance, aircraft-specific grades that satisfy FAA fire retardancy requirements and exhibit outstanding physical, mechanical, and thermal properties required for aircraft interior applications.

For more information, please contact us

Aircraft Interior Components
KYDEX® 100	Ultra high impact, high performance, fire-rated sheet suitable for a broad range of demanding applications	good for deep or hard to form parts more rigid, parts will deform less when loaded high Notched Izod impact resistance offers unsur passed resistance to breakage meets highest standard for chemical resistance for thermoplastic materials passes UL Std 94 V-0, 5V and UL 746C in all thicknesses and colors uniform wall thickness and crisp detail easy machining and fabricating using conventional methods and equipment endorsed by the Royal Institute of Public Health for conformance to the standard of Hygenic Merit
KYDEX® 110	Super tough, durable KYDEX® 110, a proprietary alloy sheet, brings new dimensions to thermoformers in: formability, rigidity, breakage resistance, chemical resistance and fire retardancy. This high performance thermoplastic sheet is availble in silver, copper and bronze. It passes Underwriter’s Laboratories, Inc® Std 94 V-0, 5V (independent lab).	for deep or hard to form parts where good finished detail is required more rigid than most thermoplastics so parts will deform less when loaded meets highest standard for chemical resistance for thermoplastic materials passes UL® Std 94 V-0, 5V in all thicknesses and colors excellent forming properties, uniform wall thicknesses and crisp detail easy machining and fabricating using conventional methods and equipment endorsed by the Royal Institute of Public Health for conformance to the standard of Hygenic Merit
KYDEX® 154	Decorative KYDEX® 154 thermoplastic sheet for thermoforming and membrane pressing and other decorative uses. Available in many standard and custom designs, offers a unique look for thermoformed parts.	available in many standard designs and custom designs (samples available upon request) more rigid than most thermoplastics so parts will deform less when loaded unsurpassed resistance to breakage passed UL Std 94 V-0, 5V in all thicknesses and colors endorsed by the Royal Institute of Public Health for conformance to the standard of Hygenic Merit
KYDEX® 1900	KYDEX® 1900 is a proprietary thermoplastic sheet with improved heat distortion temperature for higher in-service temperatures. KYDEX® 1900 meets Federal Aviation Regulation (FAR) 25.853 (a) for vertical burn. Maximum recommended service temperature is approximately 76 - 81°C (169 - 178°F) depending on the thermoforming technique and application.	available in thicknesses from 1.02mm (0.040”) to 6.35mm (0.250) and in a wide range of distinctive textures and colors meets the requirements of the Federal Aviation Administration paragraph 1ii and a1ii in all thickness for vertical burn heat distortion temperature (HDT) is 76°C (168°F) unannealed and a high 78°C (173°F) after annealing excellent thermoforming properties, uniform wall thickness and crisp detail easy machining and fabricating using conventional methods and equipment endorsed by the Royal Institute of Public Health for conformance to the standard of Hygenic Merit
KYDEX® 200	KYDEX® 200 is a proprietary thermoplastic sheet that is cost competitive with other thermoplastics while providing excellent extensibility, good impact resistance and excellent solvent resistance. Based on independent laboratory testing it meets the requirements of Underwriter’s Laboratories, Inc® Std 94 V-0 in all thicknesses. It has 534 J/m (10 ft-lbs/in) of Notched Izod impact resistance.	available in seven thicknesses from 0.71mm (0.028) and up, in eight distinctive textures and limited colors delivers performance advantages at an effective cost among the most rigid of thermoforming materials, with a high modulus elasticity particularly effective for pressure forming and/or where a part will be painted meets requirements of 94 V-0 in all thicknesses as tested by an independent lab excellent forming results, uniform wall thicknesses and crisp detail easy machining and fabricating using conventional methods and equipment endorsed by the Royal Institute of Public Health for conformance to the standard of Hygenic Merit
KYDEX® 510	KYDEX® 510 is a weatherable sheet with superior performance for thermoforming and a decorative sheet for lamination. An acrylic cap protects the surface, providing excellent weatherability for outdoor use. This product is now available with decorative caps. While excellent in thermoforming, KYDEX® 510 is also being used as damage resistant surface material.	offers same properties of KYDEX®, but in a weatherable formula highly impact resistant as measured by the Notched Izod Impact Resistance test fire retardant ( self-extinguishing) with a UL Std 94 V-0 rating low moisture absorption, resistance to chipping and cracking, excellent fabrication and machining properties and flexibility excellent forming properties, uniform wall thickness and crisp detail can be drilled, punched and cut using standard woodworking or metal working tools exhibits a Dielectric Constant of 2.76 @ 60 Hz, 2.53 @ 800 MHz and 2.51 @ 1.9 GHz endorsed by the Royal Institute of Public Health for conformance to the standard of Hygenic Merit
KYDEX® 6185	KYDEX® 6185 is a proprietary thermoplastic sheet with improved heat distortion temperature (HDT) for higher in-service temperatures while providing excellent extensibility, good impact resistance and excellent solvent resistance. KYDEX® 6185 meets FAR 25.853 (a) for use in aircraft interior parts. Maximum recommended service temperature is approximately 85 - 90°C (185 - 190°F) depending on thermoforming technique and application.	available in thicknesses from 1.00mm (0.040”) and up and in eight distinctive textures and custom colors meets the requirements of the Federal Aviation Administration FAR 25.853 (a) in all thicknesses for vertical burn heat distortion temperature (HDT) is 85°C (185°F) unannealed at 1.8 MPa (264 psi) and a high 90°C (195°F) after annealing excellent forming properties, uniform wall thickness and crisp detail easy machiniging and fabricating using conventional methods and equipment endorsed by the Royal Institute of Public Health for conformance to the standard of Hygenic Merit
KYDEX® 6200	KYDEX® 6200 is a proprietary, high performace thermoplastic sheet. It is designed for use in mass transit vehicles such as subways, vans, buses and trains. KYDEX® 6200 meets both the Federal Transit Administration (FTA) & the Federal Rail Administration (FRA) for smoke emission & flammability as tested under ASTM E-662 & ASTM E-162.	available in over 200 developed colors, eight textures and thicknesses from 0.71mm (0.028) and up easy to clean graffiti/spray paint, lipstick, pen, grease and grime with cleaners such as Soft Scrub®, Fantastic®, and citrus-based cleaners such as Cirti Kleen HD® (avoid ammoniated cleaners) resistant to a wide range of concentrated chemicals and solvents, withstands frequent cleaning without staining or fading forms to deep draws with low forces when heated to the upper range of 163 - 200°C (325 - 392°F) and an unusually high resistance to hot tearing can be formed on all standard presses and cut on all standard die-cutting machines endorsed by the Royal Institute of Public Health for conformance to the standard of Hygenic Merit
KYDEX® 6565	KYDEX® 6565 is a proprietary, high performance thermoplastic sheet specifically formulated to meet the saftey needs of the aviation industry. KYDEX® 6565 meets all fire retardancy requirements set forth in Federal Aviation Regulations 25.853 paragraphs (a) and (d) (old (c)) including low heat release (65 / 65) in the OSU rate of heat release test.	availble in over 200 developed colors, various textures and eight thicknesses rangning from 0.71mm (0.028) and up easy to clean with aggressive cleaners such as Soft Scrub®, Fantastic®, and citrus-based cleaners such as Citri Kleen® (avoid ammoniated cleaners) meets the stringent requirements of FAR 25.853 paragraph (d) in all thicknesses and colors forms deep draws with low forces when heated to the upper end of forming temperature range crisp detail, minimal rejects can be formed on all standard presses and cut on all standard die-cutting machines seconday operations include: machining, sawing, blanking, punching, etc. are easily performed endorsed by the Royal Institute of Public Health for conformance to the standard of Hygenic Merit
KYDEX® T	KYDEX® T is a proprietary thermoplastic sheet that is cost competitive with fire retardant ABS/PVC (FR-ABS) formulations but with significantly higher impact strength and extensibility. KYDEX® T is less hygroscopic, it typically does not require pre-drying, offers superior impact, more uniform forming with less wall thinning and offers significantly greater resistance to a broad range of corrosive chemicals and cleaning solutions.	substitute for FR-ABS sheet with competitive pricing but superior cost/performance higher breakage resistance measured by the Notched Izod test than competitive thermoplastics available in eight thicknesses from 0.71mm (0.028) and up, in nine textures, a variety of colors, custom blank sizes and low minimums among the most rigid of thermoforming materials with a modulus of elasticity of 2,482 MPa (360,000 psi) easy to form with excellent part definition and deep-draw characteristics form times similar to FR-ABS making it an easy transition from competitive products. endorsed by the Royal Institute of Public Health for conformance to the standard of Hygenic Merit
For more information please contact us

Copyright 1998-2007 Regal Plastic Supply Company, Dallas, TX
Questions and comments about this site should be directed to the Webmaster
Site Developed and Maintained by CustomerConnectCD.

Regal Plastics Supply Co., Dallas, TX