Weld-On 3 is a water thin, very Fast-Setting, solvent cement for bonding acrylic.
Weld-On 4 is a water thin, Moderately Fast Setting, solvent cement used to bond acrylic.
Weld-On 16 is a medium viscosity, medium bodied, high-strength, solvent cement for bonding acrylic.
Weld-On 42 is a very high-strength, two-component, reactive acrylic bonding adhesive.
Weld-On 3
Weld-On 3 is a water thin, very Fast-Setting, solvent cement for bonding acrylic. It is a non-flammable, clear adhesive agent formulated to rapidly achieve high-strength bonds. The initial bond takes only minutes to form and increases in strength over the next few hours. High humidity can affect the time the bond takes to set. In addition to adhering acrylic to acrylic, Weld-On 3 can be used to form bonds with other thermoplastics such as Polycarbonate, PETG, and Polystyrene.
Weld-On 3 is a premier choice for a variety of fabrication needs including:
Working Time: 1 minute
Fixture Time: 2 minutes
80% Strength: 24 hours
Weld-On 4
Weld-On 4 is a water thin, Moderately Fast Setting, solvent cement used to bond acrylic. It is somewhat flammable, clear adhesive agent formulated to rapidly create high-strength bonds. Initial bonding occurs within just a matter of minutes and increases significantly over the course of the next few hours. It is a preferred choice among many fabricators as it is unlikely to show blushing (white marks that occur during setting). Weld-On 4 can be used to form bonds with other thermoplastics such as Polycarbonate, PETG, and Polystyrene.
Weld-On 4 is a fantastic choice for a variety of fabrication needs including:
Working Time: 1 minute
Fixture Time: 2 minutes
80% Strength: 24 hours
Weld-On 16
Weld-On 16 is a medium viscosity, medium bodied, high-strength, solvent cement for bonding acrylic. It is somewhat flammable, clear adhesive agent formulated to rapidly create high-strength bonds. Formulated for fast bonding the initial bonding occurs within just a matter of minutes and increases significantly over the course of the next few hours. Weld-On 16 can be used to form bonds with other thermoplastics such as Polycarbonate, PETG, and Polystyrene.
Weld-On 16 is a preferred choice for a variety of fabrication needs including:
Working Time: 5-6 minutes
Fixture Time: 10 minutes
80% Strength: 24 hours
Weld-On 42
Weld-On 42 is a very high-strength, two-component, reactive acrylic bonding adhesive. It is specifically formulated to bond acrylic and provide water clear joints of a “museum grade” quality. Formulated for fast bonding the initial bonding occurs within just a matter of minutes and increases significantly over the course of the next few hours. Weld-On 42 is recommended where superior clarity is required. For use with a dispensing gun and applicator tips.
Weld-On 42 performs excellently in a variety of fabrication needs including:
